YOU LIKE IT

When was the final time the roof of one’s building was inspected? If it’s been awhile, the roof could have problems lurking that require immediate attention. Some roof problems cause obvious signs such as for example leaks, while others produce subtle signs that are only detectable on the surface. In either case, leaving the problems unaddressed can cost you a small fortune when you finally repair them. If the roof on your building has the problems listed below, an organization that specializes in commercial roofing should repair them quickly:

Buckled Panels

Roof panels buckle because of weather damage and poor installation. Whatever the cause, the buckling allows wind to blow underneath the panels, making them loose. Because the problem worsens, the panels start to fall off, often coming off in large sections when a storm hits. Professional roofing services are one of the most commonly fixed problems by companies that perform roof repair.

Expended Screw Holes

Expanded screw holes are another problem for panel roofs. Over time, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that contain the panels in place. This creates an area where water can leak within the panels and soak the roof deck. After the deck becomes saturated, the thing is costly to fix.

Blistering

Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose an issue, large ones can rupture and allow water to seep beneath the bitumen. Once the blisters form, warm weather typically makes them worse. Because of the humid subtropical climate in a few regions of the united states, commercial roofing frequently experiences blistering.

Ponding Water

Blocked drains and improper sloping can cause water to gather in small ponds on a roof. Repairing a blocked drain is simple, but fixing a sloping problem is more technical. Often, installing a taper insulation system to establish a new slope is the better solution. During the rainy season, resolving ponding water is probably the most common forms of roof repair.

Loose Flashing

Flashing prevents water from seeping in the crevice where the roof abuts to protrusions such as chimneys and vents. As time passes, most flashing should be resealed. If it’s not, leaks may cause serious damage the deck and building interior. Most flashing problems are corrected during scheduled maintenance.

Missing Mortar

Chimneys and high parts of brick walls that have sections of missing mortar could cause leaks. These leaks are often mistaken for leaks in the roof membrane, but an intensive inspection by a company that specializes in commercial roofing will reveal the real problem. Most sections of missing mortar can be repaired with basic tuck pointing procedures.

Conclusion

The problems above are a few of the most common known reasons for roof repair. When they are corrected early, most problems are inexpensive to fix, however, not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the foremost solution to ensure problems are detected early.